Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Note: Accessories may vary depending on the model purchased. For accessories that are only included with certain models, please refer to the text in brackets below. Your model number can be found on the original packaging or purchase receipt provided with your OneBlade.
- Protection cap
- 360 face blade (QP2734/20, QP2734/30, QP2734/31 & QP2834/20)
- Blade release switch
- On/off button
- 5-in-1 comb
- Original face blade (QP2724/20, QP2824/20, QP2724/30 & QP2824/30)
- Skin guard (QP2824/20, QP2834/20 & QP2824/30)
- Body comb (QP2824/20, QP2834/20 & QP2824/30)
- Body blade (QP2824/20, QP2834/20 & QP2824/30)
- Pouch (QP2824/20, QP2724/30, QP2734/31 & QP2824/30)
- USB cable
Note: A suitable power source (e.g. Philips HQ87) is available via www.philips.com/support.
Charging
Low Battery
When the battery is low, the motor will run more slowly.
Charging with the USB cable
Warning: Keep the USB cable and the USB power source dry.
- Insert the small plug of the USB cable into the socket in the bottom of the product.
-
- Insert the USB plug into the USB power source (not included).
-
- Insert the USB power source into the power outlet. The charging indicator will remain illuminated when the product is connected to the power outlet.
- Unplug the adapter from the power source, then remove the USB cable from the handle.
- Note: for safety reasons, the product can only be used when the USB cable is not attached.
The charging and usage times for your OneBlade are shown below. Note that usage times are based on a fully charged battery. To find out which model you own, refer to the text on the back of the handle, or the original packaging.
| QP2724, QP2824 (all versions) | 8 hours | 45 minutes |
| QP2734, QP2834 (all versions) | 4 hours | 60 minutes |
Turning OneBlade on and off
To turn your OneBlade on or off, simply press the power button once.
Tip: If the OneBlade will not turn on, check that the battery is fully charged and remove the charging cable from the handle before pressing the power button.
Choosing the correct blade
Depending on the model purchased, your OneBlade pack includes either one or two different types of blade.
- The 360 blade (recognizable by its U-shaped construction) is designed to closely follow the contours of your face. This type of blade is labeled as number 2 in the product overview illustration.
- The Original blade is the perfect all-rounder for day-to-day shaving and grooming on both your face and body. This type of blade is labeled as number 7 in the product overview illustration.
For hygiene reasons, it is recommended to use different blades for your face and body.
- If your model includes a 360 blade, it is recommended to use that blade type for your face.
Note: all OneBlade models are compatible with both types of blade, and both can be ordered as replacement parts.
Facial Hair
Shaving and edging
-
-
-
- To shave, make long, slow and steady strokes, applying gentle pressure with the blade flat against your skin. Move the blade back and forth to make use of both sides of the blade.
-
-
- To edge or contour your beard, mustache or sideburns, hold the blade perpendicular to your skin.
- For best results, clean your OneBlade after each use.
Trimming
-
- Hook the back of the comb under the bottom of the blade, then gently press on the front of the comb until it clicks into place.
- Note: if you experience difficulties attaching the comb, ensure that the two small hooks on the bottom (on the side closest to the teeth) are properly aligned on the upper edge of the blade.
-
- Press down on the length dial on the comb using your thumb, and roll it until your preferred length is selected.
-
-
- Trim against the direction of hair growth, with the teeth of the comb flat against your skin
-
- To detach the comb, hold the handle firmly and gently lift the comb off the blade. For best results, clean your OneBlade after each use.
Body Hair
Shaving body hair
- If you are using the skin guard, place it onto the blade and gently press until it clicks into place.
- Switch on your OneBlade, and place the blade flat against your skin.
- Make long, steady strokes, exerting gentle pressure and allowing the blade to glide across the surface of your skin.
- Tip: on certain areas, using the fingers of your free hand to spread the skin and hold it taut will provide better results.
- The blade and skin guard are double sided. Move the blade back and forth to catch hairs growing in different directions.
- Clean your OneBlade after each use. If you used the skin guard, press your thumb onto the exposed flat surface of the blade, and use your fingers to gently pull off the skin guard before cleaning.
Trimming body hair
-
- Place the the comb onto the blade and gently press until it clicks into place.
- Switch on your OneBlade.
-
- Trim against the direction of hair growth, with the teeth of the comb flat against your skin. The comb is double sided, so you can move your OneBlade back and forth to cut hairs growing in different directions.
- To detach the comb, hold the handle firmly and gently lift the comb off the blade. For best results, clean your OneBlade after each use.
Cleaning OneBlade
Clean after each use
For a quick clean, simply blow on the blade and any accessories to remove hairs and dirt.
Thorough cleaning
-
- Turn on your OneBlade and rinse it under the tap with cold or lukewarm water. If you shave with foam or gel, be sure to remove all residue after each shave.
- Combs can also be cleaned under the tap using warm water.
- Allow your OneBlade and accessories to air dry completely before storage.
Note: Do not bang the handle on the sink or any hard surface, a this may damage your OneBlade. Do not use a towel or cloth to dry the blade.
Storage
Store your OneBlade in a safe, dry location where it will not be crushed, banged, or subject to damage. To protect the blade, store the product with the protection cap attached. Do not wrap the cable around the product when storing, and do not place or store the product where it can fall or be pulled into a tub or sink, water or other liquid while plugged in.
Blade Replacement
When to replace the blade
How to replace the blade
-
- Gently pull off the old blade, holding it by both short sides.
- The old blade can be discarded with your normal household waste.
- Remove your replacement blade from the packaging. To avoid damaging the blade, don't use sharp objects or crush the packaging.
-
- Hold the new blade by both short sides and insert the protrusions on the bottom of the blade into the slots on the OneBlade handle.
- Gently press the blade downwards onto the handle until it clicks into place.
- Your OneBlade is now ready to use.
To buy accessories or spare parts, visit www.philips.com/parts-and-accessories or go to your Philips dealer. You can also contact the Philips Consumer Care Center in your country (see the international warranty leaflet for contact details).
